Kingston Memory HX426C15FBK2/8 8GB DDR4 2600 Unbuffered HyperX 2x4GB Fury Black Retail

Part # 158559

Condition : New | Warranty : 90 days

Brand : Kingston
0 review | Add Your Review





HyperX HX426C15FBK2/8 is a kit of two 512M x 64-bit (4GB) DDR4-2666 CL15 SDRAM (Synchronous DRAM) 1Rx8¸ memory module¸ based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Total kit capacity is 8GB. Each module has been tested to run at DDR4-2666 at a low latency timing of 15-17-17 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications
are as follows:


Features:



Power Supply: VDD = 1.2V Typical

VDDQ = 1.2V Typical

VPP - 2.5V Typical

VDDSPD = 2.2V to 3.6V

Nominal and dynamic on-die termination (ODT) for data¸ strobe¸ and mask signals

Low-power auto self-refresh (LPASR)

Data bus inversion (DBI) for data bus

On-die VREFDQ generation and calibration

Single-rank

On-board I2 serial presence-detect (SPD) EEPROM

16 internal banks; 4 groups of 4 banks each

Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

Selectable BC4 or BL8 on-the-fly (OTF)

Fly-by topology

Terminated control command and address bus

Height 1.340 (34.04mm)¸ w/heatsink


JEDEC/XMP TIMING PARAMETERS



JEDEC/PnP:

- DDR4-2666 CL15-17-17 at 1.2V

- DDR4-2400 CL14-16-16 at 1.2V

- DDR4-2133 CL12-14-14 at 1.2V

XMP Profile #1: DDR4-2666 CL15-17-17 at 1.2V

""
No details available
No reviews available

Copyright © 2024 All Rights Reserved. Interloper