|
Home > Motherboards and Multi-Media > Motherboards: Legacy > Socket 3,5,7, and 8 > FIC VA-503+
Click here to go back
54000107 - FIC VA-503+ Condition: Refurbished. Warranty: 30 days. $149.99
FIC VA-503+ Super Socket 7 Baby AT motherboard with 3 ISA slots. Specifications, price and availability
FIC VA-503+
Super Socket 7 Baby AT Motherboard
|
| |
|
|
- IDE:
- Two dual-channeled Enhanced PCI
Bus Mastering IDE connectors;
- Ultra DMA/33 support, PIO Mode
4; DMA Mode 2 support
- BIOS:
- Award Plug and Play BIOS, DMI 2.0
compliant, Flash EPROM, LS-120 support
- Summary:
- The FIC VA-503+ is a very
versatile super socket 7 motherboard. Baby AT form factor and it's
ability to take both SIMMs and DIMMs make it a very popular board.
The FIC VA-503+ super socket 7 motherboard supports up to the AMD
K6-2 550 CPU.
- Note:
- This is a refurbished motherboard.
- Does not come with any cables,
manuals or drivers.
- If you need the cable set, we sell
that separately.
Part # 50600004 - AT motherboard cable
set. $12
2 IDE Cables, 1 Floppy Drive cable, 1 Parallel Cable, and 1
Serial Cable.
|
Motherboard
Specifications
- Model:
- FIC VA-503+ Super Socket 7 Baby AT
motherboard
- Processor Support:
- 321-pin ZIF socket (Socket 7) with
Switching Voltage Regulator 2.0~3.5V
- Intel Pentium processor with MMX
technology 166~233 MHz
- AMD-K6 PR266-PR300, K6-2 233~550
and K6-III up to 450MHz.
- Cyrix/IBM 6x86MX™ PR166-PR350
processors and Cyrix MII up to 333Mhz.
- Chipset:
- FSB:
- Supports 66/75/83/100MHz
Front Side Bus
- Memory:
- 4 x 72-pin SIMM sockets support EDO
and Fast Page SIMMs
- 2 x 168-pin SDRAM DIMMs sockets
support non ECC and ECC PC-100 SDRAM DIMMS
- You cannot use both types of memory at
the same time. Use either SIMMs or DIMMs.
- Expansion Slots:
- 1 x 32-bit AGP slot
- 3 x 32-bit PCI slots
- 3 x 16-bit ISA slots
- Cache:
- Onboard 1MB Pipeline Burst
Synchronous SRAM Standard
- Internal I/O Interface:
- Winbond 877TF/AF I/O chipset
- 2 serial ports with 16550 UART/IrDA
- 1 parallel port with EPP/ECP
- Optional FIR connector
- Optional PS/2 connector
- Optional USB daughter board
- Form Factor:
- Baby AT form factor; 9.2" x
8.6" (233.68mm x 218.44mm)
|
|
Copyright © 2010 INTERLOPER.COM. All rights reserved.
|
|