• Storage:
  • Four (4) SATA 2.0 ports from Intel ESB2
  • Integrated RAID 0, 1, 5 and 10 support
    (RAID 10 only supported under windows)
  • Single-channel master mode supports up to two IDE devices
  • Supports IDE drives & ATAPI-compliant devices

• Rear Panel I/O Ports:
  • (1) Stacked PS/2 mouse and keyboard ports
  • Two side-by-side RJ45 (GbE LAN) ports
  • (2) Stacked USB 2.0 ports
  • (1) 9-pin COM port
  • (1) 15-pin VGA port

• Internal I/O Interface:
  • (1) Floppy connector
  • (1) IDE connector
  • One 9-pin serial port (pin header)
  • Two USB 2.0 ports (via cable)
  • Eight SAS/SATA ports (SAS 4 in 1 & four standard connectors)
  • Four standard SATA connectors

• BIOS:
  • Phoenix BIOS ® on 8Mbit Flash ROM
  • Supports APM 1.2, ACPI 1.0b
  • Serial Console Redirect
  • PXE via Ethernet, USB device boot
  • PnP, DMI 2.0, WfM 2.0 Power Management
  • User-configurable H/W monitoring
  • Auto-configuration of hard disk types
  • Multiple boot options
  • 48-bit LBA support

• System Management:
  • Winbond W83793G Hardware Monitoring IC
  • CPU thermal & voltage monitor support; PECI
  • Circuit for "Woodcrest" processor thermal monitor
  • Multiple 4-pin fan monitoring headers
  • Infineon SLB9635 TPM
  • (Trusted Platform Module); option
    

Motherboard Specifications

• Model:
  • Tyan Tempest i5000PT (S5383WG4NR) Motherboard

• Processor Support:
  • Dual LGA771 sockets
  • Supports up to two Intel ® Xeon ® processors 5000/5100 series; dual-core
  • 1333/1066/667MHz FSB; VRD 11.0

• Chipset:
  • Intel ® 5000P chipset
  • Intel ® 6321ESB I/O Controller Hub
  • Winbond 83627HF Super I/O chip

• Memory:
  • Sixteen (16) 240-pin DDR2 FBDIMM sockets
  • Supports maximum of 64GB of DDR2-533/667

• Expansion Slots:
  • One (1) PCI-E x8 slot (w/ x8 signals from MCH)
  • One (1) PCI-E x8 slot (w/ x8 signals from ESB2)
  • Total of two expansion slots

• On-Board LAN:
  • One Intel ® "Gilgal" (82563EB) PHY
    - Direct link to ESB2
    - Two Gigabit LAN ports
    - Two front panel LED pin headers
  • One Intel ® "Ophir" (82571EB); optional
    - Link to MCH
    - Two Gigabit LAN ports
    - Two front panel LED pin headers

• Intelligent Platform Management Interface (optional):
  • Baseboard Management Controller (BMC)
    - BMC from daughter card M3291 (optional)
  • Server Management Daughter card via built-in
    2x25 header
  • Tailored for IPMI 2.0 specification
  • Supports remote Power on/off and reset support
    (IPMI-over-LAN)

• Integrated SAS Controller:
  • LSI 1068E SAS controller
  • (8) SAS ports; RAID 0, 1, and 1E supported
  • Supports Integrated Mirroring, Integrated
    Enhanced Mirroring, and Integrated Stripping

• Integrated Video:
  • ATI ® ES1000; PCI interface
  • 32MB DDR frame buffer
  
  
• Regulatory:
  • FCC Class B (Declaration of Conformity)
  • European Community CE (DoC); BSMI (opt.)

• Form Factor:
  • SSI / Extended ATX footprint (12" x 13")
  • EPS12V / SSI (24 + 8 + 8 pin) power connectors