Home > Collectibles > Decorative Collectibles > Decorative Collectible Brands > Longaberger > Other Longaberger > 2U PCI Ribbon Riser Card
2U 64bit pci riser card - convert 1 PCI slot to 3 PCI slots
Click here to go back
103466 - 2U PCI Ribbon Riser Card
Condition: New . Warranty:90 days . $25.00
2U 64bit PCI Ribbon Riser Card
2U 64bit PCI
Ribbon Riser Card 1 x 3
This is a PCI 3 in 1 right angle riser card. The overall dimension of the
main board assembly is 2.75"H x 7.10"W. The top slot is connected
directly to the gold fingers. The middle and bottom slots are tied together, and
their PCI bus signals come from a wide cable that connects to another PCI slot
on the motherboard. However, there are some dedicated signals that are needed
for the middle slot, and they are borrowed from a narrow cable that connects to
yet another nearby motherboard PCI slot. This arrangement allows the top slot to
work with an independent PCI slot on the motherboard than the other two slots.
The wide cable and the narrow cables should connect to PCI slots on the
Motherboard that are controlled by a common PCI bridge chip. All connectors are
mounted on the B side of the riser card. The top PCI slot is located at
2.515", the center PCI slot is located at 1.715", and the bottom PCI
slot is located at 0.915" from the bottom of the board.
MB PCI/AGP Slot positions:
Position A: normally it's AGP,
6.4" away from the Keyboard connector edge.
Position B: normally it's 1st PCI,
7.2" away from the Keyboard connector edge.
Position C: normally it's 2nd PCI
Position D: normally it's 3rd PCI