
Supermicro X6DHE-XG2
Motherboard
- Storage:
- ICH5R SATA Controller
- RAID 0, 1, JBOD support
- Support for Intelligent Platform Management Interface
v.2.0 (Optional)
- Support for Intelligent Platform Management Interface
v.2.0 (Optional)
- Rear Panel I/O Ports:
- Super I/O: National 87427 chip
- Two Serial ATA ports
- Two SATA hard drives supported
- Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- 1 Floppy controller; 1.44 MB, 2.88 MB
- USB 2.0 Compliant / 1.1 Compliant
- PS/2 keyboard and mouse ports
- 2 Fast UART 16550 serial ports
- Special Features:
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
- OS Compatibility Chart
- Important Chassis Notes:
To
ensure system stability, a 420W (minimum) ATX power supply [4-pin
(+12V), 8-pin (+12V) and 24-pin are required] Chassis must have CPU
mounting holes required for 800MHz FSB CPUs with this serverboard.
- Hardware Monitoring:
- Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V
Standby
- CPU Core 3-Phase-switching voltage regulator with
auto-sense from 0.83V-1.6V
- FAN: Total of eight 4-pin fan headers
- 8x fans with status monitoring
- Status monitor with firmware/software on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 support
- CPU Overheat LED
- System Overheat LED
- Suspend-state indicator LED
- Chassis intrusion detection
- Chassis intrusion header
- SDDC
|
Motherboard Specifications
- Model:
- Supermicro X6DHE-XG2 Motherboard
- Processor Support:
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel ® 64-bit Xeon ®processor(s)
of the same type below: Xeon (Nocona) CPU with 1MB L2 Integrated
Advanced Transfer Cache, up to 3.60 GHz Xeon (Irwindale) CPU with
2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz Xeon LV (Low
Voltage) CPU, up to 2.8 GHz
- Chipset:
- Intel ® E7520 chipset
- MCH + ICH5R + PXH +82546GB
- Memory:
- Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
- DDR2 400MHz buffered (registered) ECC SDRAM 72-bit,
240-pin gold-plated DIMMs
- 256 MB, 512 MB, 1GB, 2GB
- 1.8V only
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel ® x4 Single Device Data Correction (SDDC)
- Expansion Slots:
- 3x 64-bit 133MHz PCI-X (3.3V) slots
- 2x 64-bit 100MHz PCI-X (3.3V) slots
- On-Board Video:
- ATI Rage XL SVGA PCI video controller with 8 MB of
video memory
- On-Board LAN:
- Intel ® 82546GB Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45
output
- Form Factor:
- Extended ATX
- 12" x 13.05" (30.5cm x 33.2cm)
- Manageability:
- Optional IPMI (Intelligent Platform Management Interface)
2.0
- NMI
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
- BIOS:
- 8Mb Flash EEPROM with Phoenix ® BIOS
- Features: Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
|