Supermicro X7DBU Motherboard
- Storage:
- Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
- Support for Intelligent Platform Management Interface
v.2.0
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO(+))
- For Dedicated LAN, cable CBL-0177L must be used (cable
sold separately)
- Rear Panel I/O Ports:
- Clock Generator: IDT CV152
- Super I/O: Winbond 83627HF chip
- Six Serial ATA ports
- Single EIDE channel supports up to two UDMA IDE devices
(IDE-M, IDE-S)
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- 1 Floppy controller; 1.44 MB, 2.88 MB
- 2x RJ45 LAN ports
- 2x USB rear ports
- 3x USB internal headers
- Total 5 USB 2.0 Compliant / 1.1 Compliant
- 1x VGA Port
- PS/2 keyboard and mouse ports
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
- Hardware Monitoring:
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V
Standby, +5V Standby, VBAT, HT, Memory Voltage, Chipset Voltage
- 5-Phase-switching voltage regulator with auto-sense
from 0.8375V-1.60V
- FAN: Total of four 3-pin and four 4-pin fan headers
supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Support 3-pin speed control
- Pulse Width Modulated (PWM) fan connectors
- Temperature: Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
- CPU / System Overheat LED
- UID / Remote UID LED ( IPMI Only )
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
- Environmental Spec.: Operating Temperature: 10 °to 35 °C
(50 °to 95 °F)
- Non-operating Temperature: -40 °to 70 °C (-40 °to 158 °F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95%
(non-condensing)
- Passed to meet FCC standard requirement
|
Motherboard Specifications
- Model:
- Supermicro X7DBU Motherboard
- Processor Support:
- Dual 771-pin LGA Sockets
- Supports up to two Intel ® 64-bit Xeon ®processor(s)
of the same
- type below: Quad-Core Intel ® Xeon ®Processor 5400/5300
sequence (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel ® Xeon ®Processor 5200/5100/5000 sequence
(Wolfdale/Woodcrest/Dempsey processor) up to 3.40 GHz
- Chipset:
- Intel ® 5000P (Blackford) chipset
- ESB2
- FSB:
- 1333 / 1066 / 667 MHz system bus
- Memory:
- Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM
memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
- 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2
SDRAM 72-bit, 240-pin gold-plated DIMMs
- 256MB, 512 MB, 1GB, 2GB, 4GB
- Expansion Slots:
- Left Side: 1 (x8) PCI-Express & 1
UIO slot
- Right Side: 1 64-bit 133MHz PCI-X or 1 (x8) PCI-Express
- On-Board Video:
- ATI ES1000 controller with 16 MB of video memory
- On-Board LAN:
- Intel ® (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet
Controller
- Form
Factor/Dimensions:
- Proprietary
- 12" x 13" (30.5cm x 33.2cm)
- Manageability:
- Optional IPMI (Intelligent Platform Management
Interface) 1.5 / 2.0
- NMI
- Power Configurations: ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
- BIOS:
- 8Mb Flash EEPROM with Phoenix ® BIOS
- Features: Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2ACPI 1.0 / 2.0
- USB Keyboard support
- Special Features:
- Operating System Software: Supports 64-bit Operating
Systems
- Supports 32-bit Operating Systems
- Important Chassis Notes: To ensure system stability, a
550W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 20-pin
are required]
|