Supermicro X7DB8 Motherboard

• Storage:
  • SCSI: Adaptec AIC-7902 Controller
  • Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
  • Host RAID 0, 1, & 10 support
  • Support for Zero-Channel RAID
  • Optional: (Card not included)
  • RAID 0, 1, 5, 10
  • Intel ESB2 SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows Only)
  • RAID 0, 1, 10 support (Linux)
  • Support for Intelligent Platform Management Interface v.2.0
  • 200-pin IPMI slot (SIMLP)
  • (Optional: AOC-SIMLP-B(+))
  • (Optional: AOC-SIMLP-3(+)) with 3rd LAN support

• Rear Panel I/O Ports:
  • Super I/O: Winbond 83627HG chip
  • Six Serial ATA ports
  • Six SATA hard drives supported
  • Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
  • Compact Flash (40-pin connector, IDE 1, single channel) slot
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
  • 1 Floppy controller; 1.44 MB, 2.88 MB
  • 2x RJ45 LAN ports
  • 2x USB rear ports
  • 3x USB internal headers
  • Total 5 USB 2.0 Compliant / 1.1 Compliant
  • 1x VGA Port
  • PS/2 keyboard and mouse ports
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header
  • 1 ECP / EEP parallel port
    
    
    
    

• Hardware Monitoring:
  
  • Monitors for CPU Cores, +3.3V, +5V, +5V Standby, & ±12V
  • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
  • FAN: Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
  • 8x fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Temperature: Pulse Width Modulated (PWM) fan connectors
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x fan connectors
  • PSU I²C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • CPU / System Overheat LED
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • RoHS
  • Environmental Spec.: Operating Temperature: 10 °to 35 °C (50 °to 95 °F)
  • Non-operating Temperature: -40 °to 70 °C (-40 °to 158 °F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
    

Motherboard Specifications

• Model:
  • Supermicro X7DB8 Motherboard
    

• Processor Support:
  
  • Dual 771-pin LGA Sockets
  • Supports up to two Intel ® 64-bit Xeon ®processor(s) of the same
  • type below: Quad-Core Intel ® Xeon ®Processor 5400/5300 sequence (Harpertown/Clovertown processor) up to 3.16 GHz
  • Dual-Core Intel ® Xeon ®Processor 5200/5100/5000 sequence (Wolfdale/Woodcrest/Dempsey processor) up to 3.40 GHz
  • NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon ® 5100 (Woodcrest) processors

• Chipset:
  
  • Intel ® 5000P (Blackford) chipset
  • MCH + PXH + ESB2

• FSB:
  • 1333 / 1066 / 667 MHz system bus

• Memory:
  
  • Eight 240-pin DIMM sockets
  • Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
  • Dual branch memory bus
  • Memory must be populated in pairs
  • Memory Mirroring supported
  • 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • 512 MB, 1GB, 2GB, 4GB
  • 1.8V only
  • 1.5V(AMB)
  • Error Detection: Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel ® x4 and x8 Single Device Data Correction (SDDC)

• Expansion Slots:
  
  • 2 (x8) PCI-e slots
  • 1 (x4) PCI-e (using x8) slot
  • 1 SEPC (Supermicro PCI-e Power Connector) slot for 2U active riser cards with a power extension (i.e. CSE-RR2UE-AX)
  • 2x 64-bit 133MHz PCI-X (3.3V) slots
  • 1x 64-bit 100MHz PCI-X (3.3V) slot

• On-Board Video:
  • ATI ES1000 controller with 16 MB of video memory

• On-Board LAN:
  
  • Intel ® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel ® I/OAT support for fast, scaleable, and reliable networking

• Form Factor/Dimensions:
  • Extended ATX
  • 12" x 13.05" (30.5cm x 33.2cm)
• Manageability:
  
• Optional IPMI (Intelligent Platform Management Interface) 2.0
• SuperDoctor ® III
• Watch Dog
• NMI
• Power Configurations: ACPI Power Management
• Main Switch Override Mechanism
• Wake-On-Ring (WOR) header
• Wake-On-LAN (WOL) header
• Power-on mode for AC power recovery
• Internal / External modem remote ring-on
• BIOS:
• 8Mb Flash EEPROM with Phoenix ® BIOS
• Features: Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.1
• PCI 2.2
• ACPI 1.0
• USB Keyboard support
• Hardware BIOS Virus protection
• Special Features:
  
• Operating System Software: Supports 64-bit Operating Systems
• Supports 32-bit Operating Systems
• Important Chassis Notes: To ensure system stability, a 500W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 24-pin are required]