Supermicro X7DVA-8
Motherboard
- Storage:
- Adaptec AIC-7902 Controller
- Dual-Channel SCSI supports up to four Ultra 320 hard
drives
- Host RAID 0, 1, & 10 support
- Support for Zero-Channel RAID
- Optional: (Card not included)
- RAID 0, 1, 5, 10
- Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows Only)
- Support for Intelligent Platform Management Interface
v.2.0
- 200-pin IPMI slot (SIMLP)
- (Optional: AOC-SIMLP-B(+))
- (Optional: AOC-SIMLP-3(+)) with 3rd LAN support
- Rear Panel I/O Ports:
- Super I/O: Winbond 83627HG chip
- Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI supports up to 4 Ultra 320
drives
- Host RAID 0, 1, & 10 support
- Six Serial ATA ports
- Six SATA hard drives supported
- Single EIDE channel supports up to two UDMA IDE devices
(IDE-M, IDE-S) including CF(Compact Flash) Card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- 1 Floppy controller; 1.44 MB, 2.88 MB
- 2x RJ45 LAN ports
- 2x USB rear ports
- 2x USB internal headers
- Total 6 USB 2.0 Compliant / 1.1 Compliant
- 1x VGA Port
- PS/2 keyboard and mouse ports
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
- Special Features:
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
- Important Chassis Notes: To ensure system stability,
use a 500W (minimum) ATX power supply
[8-pin (+12V) and 24-pin are required]
- Hardware Monitoring:
- Monitors for CPU Cores, +3.3V, +5V, ±12V
- 5-Phase-switching voltage regulator with auto-sense
from 0.8375V-1.60V
- FAN: Total of six 4-pin fan headers supporting up to 6
fans
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
- Temperature: Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x fan connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- CPU / System Overheat LED
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
- Environmental Spec.: Operating Temperature: 10 °to 35 °C
(50 °to 95 °F)
- Non-operating Temperature: -40 °to 70 °C (-40 °to 158 °F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95%
(non-condensing)
- FCC: Passed to meet FCC standard requirement
|
Motherboard Specifications
- Model:
- Supermicro X7DVA-8 Motherboard
- Processor Support:
- Dual 771-pin LGA Sockets
- Supports up to two Intel ® 64-bit Xeon ®processor(s)
of the same
- type below: Quad-Core Intel ® Xeon ®Processor
- 5400/5300 sequence (Harpertown /Clovertown processor)
- up to 3.16 GHz Dual-Core Intel ® Xeon ®Processor
5200/5100/5000 sequence (Wolfdale /Woodcrest/Dempsey processor) up
to 3.40 GHz
- Chipset:
- Intel ® 5000V (Blackford VS) chipset
- MCH + ESB2
- FSB:
- 1333 / 1066 / 667 MHz system bus
- Memory:
- Six 240-pin DIMM sockets
- Supports up to 24 GB 667 / 533MHz DDR2 ECC FB-DIMM
memory
- Memory must be populated in pairs
- No Memory Mirroring support
- 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2
SDRAM 72-bit, 240-pin gold-plated DIMMs
- 512 MB, 1GB, 2GB, 4GB
- Error Detections: Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel ® x4 and x8 Single Device Data Correction
(SDDC)
- Expansion Slots:
- 1 (x8) PCI-e slot
- 1 (x4) PCI-e (using x8) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
- 1x 32-bit 33MHz PCI (3.3V) slot
- On-Board Video:
- ATI ES1000 controller with 16 MB of video memory
- On-Board LAN:
- Intel ® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet
Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45
output
- Intel ® I/OAT support for fast, scaleable, and
reliable networking
- Form Factor:
- ATX
- 12" x 10" (30.5cm x 25.4cm)
- Manageability:
- Optional IPMI (Intelligent Platform Management
Interface) 2.0
- NMI
- ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
- BIOS:
- 8Mb Flash EEPROM with Phoenix ® BIOS
- Features: Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- PCI 2.2
- ACPI 1.0USB Keyboard support
- Hardware BIOS Virus protection
|