Gigabyte G1.Sniper 3 Motherboard
Intel LGA1155 Motherboard, with 4 PCI-e x16 Slots/2 PCI-e x1 Slots/1
PCI Slot, on board audio, video and LAN, 14 USB Ports, 6 SATA Ports, 1
mSATA, 4 DIMM Slots and EATX Form Factor
|
Gigabyte G1.Sniper 3
Motherboard
- Storage:
- 2 x SATA 6Gb/s connectors (SATA3 0/1) supporting up to
2 SATA 6Gb/s devices
- 4 x SATA 3Gb/s connectors (SATA2 2/3/4/5) supporting up
to 4 SATA 3Gb/s devices
- 1 x mSATA connector
* The SATA2 5 connector will become unavailable when the mSATA
connector is installed with a solid state drive.
- Support for RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s
channels, the system performance of the RAID set may vary depending on
the devices being connected.
- Rear Panel I/O Ports:
- Up to 2 USB 3.0/2.0 ports on the back panel
- Up to 4 USB 2.0/1.1 ports (available through the
internal USB headers)
- Up to 8 USB 3.0/2.0 ports (4 ports on the back panel, 4
ports available through the internal USB headers)
- 1 x PS/2 keyboard/mouse port
- 6 x USB 3.0/2.0 ports
- 1 x D-Sub port
- 1 x DVI-D port
- 1 x HDMI port
- 1 x DisplayPort
- 2 x RJ-45 ports
- 1 x optical S/PDIF Out connector
- 5 x audio jacks (Center/Subwoofer Speaker Out, Rear
Speaker Out, Line In/Mic In, Line Out, Headphone)
- iTE I/O Controller Chip
- Internal I/O
Interface:
- 1 x 24-pin ATX main power connector
- 1 x 8-pin ATX 12V power connector
- 1 x PCIe power connector
- 6 x SATA 6Gb/s connectors
- 4 x SATA 3Gb/s connectors
- 1 x mSATA connector
- 1 x CPU fan header
- 4 x system fan headers
- 1 x front panel header
- 1 x front panel audio header
- 2 x USB 2.0/1.1 headers
- 2 x USB 3.0/2.0 headers
- 2 x IEEE 1394a headers
- 1 x Clear CMOS jumper
- 1 x power button
- 1 x Clear CMOS button
- 1 x reset button
- Voltage measurement points
- 1 x BIOS switch
- 1 x Trusted Platform Module (TPM) header
- BIOS:
- 2 x 64 Mbit flash
- Use of licensed AMI EFI BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
- Hardware Monitoring:
- System voltage detection
- CPU/System temperature detection
- CPU/System fan speed detection
- CPU overheating warning
- CPU/System fan fail warning
- CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will
depend on the CPU/system cooler you install.
|
Motherboard Specifications
- Model:
- Gigabyte G1.Sniper 3 Motherboard
- Processor Support:
- Support for Intel ® Core i7 processors/Intel ® Core i5 processors/ Intel ® Core i3 processors/Intel ®Pentium ® processors/Intel ® Celeron ® processors in the LGA1155
package
- L3 cache varies with CPU
- Chipset:
- Intel ® Z77 Express Chipset
- Memory:
- 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of
system memory
* Due to Windows 32-bit operating system limitation, when more than 4
GB of physical memory is installed, the actual memory size displayed
will be less than 4 GB.
- Dual channel memory architecture
- Support for DDR3 2800(OC)/1600/1333/1066 MHz memory
modules
- Support for non-ECC memory modules
- Support for Extreme Memory Profile (XMP) memory modules
- Expansion Slots:
- 2 x PCI Express x16 slots, running at x16 (PCIEX16_1,
PCIEX16_2)
* For optimum performance, if only one PCI Express graphics card is to
be installed, be sure to install it in the PCIEX16_1 slot; if you are
installing two PCI Express graphics cards, it is recommended that you
install them in the PCIEX16_1 and PCIEX16_2 slots.
- 2 x PCI Express x16 slots, running at x8 (PCIEX8_1,
PCIEX8_2)
* The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the
PCIEX8_2 slot with PCIEX16_2. The PCIEX16_1/PCIEX16_2 slot will operate
at up to x8 mode when the PCIEX8_1/PCIEX8_2 is populated.
(The PCI Express x16 slots conform to PCI Express 3.0 standard.)
* PCIE Gen.3 is dependent on CPU and expansion card compatibility.
- 2 x PCI Express x1 slots
(The PCI Express x1 slots conform to PCI Express 2.0 standard.)
- 1 x PCI slot
- On-Board Video:
- 1 x D-Sub port
- 1 x DVI-D port, supporting a maximum resolution of
1920x1200
* The DVI-D port does not support D-Sub connection by adapter.
- 1 x HDMI port, supporting a maximum resolution of
1920x1200
- 1 x DisplayPort, supporting a maximum resolution of
2560x1600
- Support for 4-Way/3-Way/2-Way AMD CrossFireX/NVIDIA
SLI technology
- On-Board Audio:
- Creative CA0132 chip
- Support for Sound Blaster Recon3Di
- High Definition Audio
- 2/5.1-channel
- Support for S/PDIF Out
- On-Board LAN:
- 1 x Qualcomm Atheros Killer E2200 LAN chip (10/100/1000
Mbit) (LAN1)
- 1 x Intel GbE LAN phy (10/100/1000 Mbit) (LAN2)
- Wi-Fi 802.11 a/b/g/n, Supports 2.4/5 GHz Dual-Band
- Bluetooth 4.0, 3.0+HS, 2.1+EDR
- Form
Factor/Dimensions:
- E-ATX Form Factor; 30.5cm x 26.4cm
- Special Features:
- Firewire: Up to 2 IEEE 1394a ports (available through
the internal IEEE 1394a headers)
- Support for @BIOS
- Support for Q-Flash
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for EasyTune
* Available functions in EasyTune may differ by motherboard model.
- Support for eXtreme Hard Drive (X.H.D)
- Support for Auto Green
- Support for ON/OFF Charge
- Support for Q-Share
- Support for 3D Power
- Support for EZ Setup
- Norton Internet Security (OEM version)
- Intel ® Rapid
Start Technology
- Intel ® Smart
Connect Technology
- Intel ® Smart
Response Technology
- LucidLogix Virtu MVP
- O.S: Support for Microsoft ® Windows 8/7
|