Supermicro X6DAL-TG Motherboard
Dual 604 Socket for Intel 64bit
Xeon, Intel E7525, 6 DIMM, SATA, RAID, IDE, 1 PCI Express 16x, 1 PCI
Express 8x, 2 PCI-X, 2 PCI, USB, LAN, Audio Support. |
|
- Internal I/O Interface:
- Adaptec AIC-8130: Marvell
88SX6041 4-port Hercules-2, rev B2, SATA Controller with support
for 4x SATA ports
- RAID 0, 1 and JBOD support
- Intel 6300ESB (Hance Rapids)
SATA Controller with support for 2x SATA ports
- RAID 0, 1 and JBOD support
- Storage/RAID:
- Four SATA ports (via Marvell
88SX6041)
- Two SATA ports (via Intel
6300ESB)
- Up to six SATA hard drives
supported
- Dual EIDE channels support up
to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode
4, and ATA/100
- Floppy controller; 1.44 MB,
2.88 MB, 3-mode support
- BIOS:
- 8Mb Flash EEPROM with AMI ® BIOS
- Plug and Play (PnP)
- SMBIOS 2.3
- APM 1.2
- DMI 2.1
- ACPI 2.0
- On-Board Audio:
- AC'97 audio CODEC
- high quality 6-channel sound
- On-Board LAN:
- 1x Intel ® 82541GI Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ45 output
- Rear Panel I/O Ports:
- 1x RJ45 LAN port
- Up to 4 USB 2.0: 2 ports, 2
headers
- 1x Line In / Line Out / Microphone
ports
- PS/2 keyboard and mouse ports
- 2 Fast UART 16550 serial ports
- 1 ECP/EEP parallel header (CBL-081
required)
|
X6DAL-TG
Specifications
- Processor Support:
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel ® 64-bit
Xeon ® processor(s) of the same type
- 800MHz system bus
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
- Chipset:
- FSB:
- Memory:
- Six 184-pin DIMM sockets
- Supports up to 12 GB DDR 333 MHz
or
- Supports up to 24 GB DDR 266 MHz
- Dual channel memory bus
- Memory must be populated in pairs
- Expansion Slots:
- 1 (x16) PCI-e slot
- 1 (x8) PCI-e slot
- 2x 64-bit 66MHz PCI-X (3.3V) slots
- 2x 32-bit 33MHz PCI (5V) slots
- Form Factor:
- ATX
- 12" x 10" (30.5cm x 25.4cm)
- Manageability:
- Monitors for CPU Cores, +3.3V, +5V,
±12V & +5V Standby
- CPU Core 4-Phase-switching voltage
regulator with auto-sense from 1.3V-1.5V
- Adjustable CPU clock frequency ratio
settings (via BIOS)
- Total of six 4-pin fan headers
6x fans with status monitoring
- Status monitor with firmware/software
on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan
connector
- Temperature Monitoring for CPU,
chassis, environment
- CPU thermal trip support
Thermal Monitor 2 support
- CPU Overheat LED
- System Overheat LED
- Suspend-state indicator LED
- Power Fail LED
- Power LED
- HDD LED
- NIC LED
- Fan Fail LED
- Chassis intrusion detection
- Chassis intrusion header
- SDDC
- Memory Sparing
|
