Tyan  S2881UG2NR Dual Opteron

Tyan S2881UG2NR Dual Opteron

Part # 109650

Condition : New- Retail Box

| Warranty: 365 days

Brand : Tyan

Rate this product:


Loading...

Click "Notify" to get an alert when it's available

Tyan S2881UG2NR Dual Opteron SCSI SATA Video 2GbE LAN Motherboard

Tyan S2881UG2NR Dual Opteron SCSI SATA Video 2GbE LAN Motherboard

Dual µPGA 940-pin ZIF sockets; Supports upto two AMD Opteron processors, DUAL-CORE

Tyan S2881UG2NR Dual Opteron/ SATA/ RAID/ EATX Motherboard, Dual  µPGA 940-pin ZIF sockets, AMD-8131 HyperTransport&trade, 32GB of Registered DDR, Adaptec 7902 U320 SCSI controller, Supports 4 channel SATA port for up to four SATA devices, Dual IDE channels supports up to four EIDE devices, 2 PCI-X slots

  • Rear Panel I/O Ports:
    • Serial (one) and VGA (one) connectors
    • Stacked USB 1.1 (two) connectors
    • Stacked USB 1.1 (two) connectors
    • Two RJ-45 LAN connectors with LEDs
  • Internal I/O Interface:
    • One floppy connector support up to two drives
    • Two 9-pin serial ports
    • - one connector and one header
    • One 25-pin SPP/ECP/EPP parallel header
    • Four USB v1.1 ports
    • One 15-pin VGA connector
    • PS/2 mouse and keyboard connectors
  • Integrated SCSI Controller (option):
    • Adaptec 7902 U320 SCSI controller
    • Two U320 68-pin SCSI connectors
    • Connects to PCI-X Bridge A
    • Adaptec ZCR support through low-profile SO-DIMM Card
  • Integrated Enhanced IDE Controller:
    • Two IDE dual-drive ports for up to four
      EIDE devices
    • Supports for UDMA 33/66/100/133 IDE drives and ATAPI compliant devices

  • Integrated PCI Graphics:
    • ATI® RAGE XL 8MB PCI graphics controller
  • Intelligent Platform Management Interface Header
    • TYAN Server Management Daughter card
      (optional) supports features listed below via
      IPMI header (SMDC/TSO Support)
    • QLogic Zircon Baseboard Management
      Controller (BMC) based on powerful ARM7
      technology
    • Tailored for IPMI highest 1.5 Spec.
    • Supports KCS and BT styles
    • Flexible Windows or Linux Management Solution
    • Supports RMCP and SNMP protocols
    • Supports ASF standard and EMP
    • I2C serial multi-master controllers and UARTs
    • Build-in IPMB connector
    • Remote power on/off and reset support
      (IPMI-over-LAN)

Motherboard Specifications

  • Model:
    • Tyan S2881UG2NR Dual Opteron Motherboard
  • Processor Support:
    • Dual µPGA 940-pin ZIF sockets
      Supports up to two AMD Opteron processors
    • Single or dual core processor support
      128-bit DDR dual-channel memory controller (integrated in CPU)
    • Supports Single and Dual Core processors
  • Chipset:
    • AMD-8131 HyperTransport PCI-X Tunnel
    • AMD-8111 HyperTransport I/O Hub
    • Winbond W83627HF Super I/O ASIC
    • Analog Devices ADT7463 Hardware Monitoring IC
  • Memory:
    • 128-bit DDR memory bus
      Eight 184-pin 2.5-Volt DDR DIMM sockets
    • Supports up to 32GB of Registered DDR
      Supports ECC type memory modules
    • Supports DDR 266/333/400
    • Supported with Opteron 246 CPU's or higher
    • Supports Single/Dual/Quad Rank mem. modules
  • Expansion Slots:
    • Two independent 64-bit PCI-X buses)
    • One 100/66/33 MHz PCI-X slots at PCI-X bus A
    • One 133/100/66/33 MHz (3.3-volt) PCI-X slot
    • Total of two usable slots
  • On-Board LAN:
    • Broadcom BCM5703C GbE controller
    • - Two RJ-45 LAN connectors with LEDs
    • - Connected to PCI-X Bridge A
    • Two Front Panel LED headers

  • Integrated SATA Controller
    • Silicon Image Sil3114 SATA controller
    • Supports S-ATA 1.0 specification
    • Supports 4 channel SATA port for up to four SATA 150 devices
    • Supports RAID 0, 1, 0+1
  • BIOS:
    • AMI ® BIOS 8.0 on 4Mbit LPC Flash ROM
    • Supports ACPI 2.0 and SRAT
    • Supports PXE via Ethernet, USB device boot
    • Headless Operation via serial console redirect and remote flash
    • SMBIOS 2.3.1, BBS 1.1 compliant
    • 48-bit LBA Support
  • System Management:
    • Total of nine 3-pin fan headers
    • Six fan headers with monitoring
    • One 2-pin Chassis Intrusion header
    • Temperature, voltage and fan monitoring
    • Port 80h LED 7-segment display
  • Form Factor:
    • SSI EEB v3.0 footprint (12"x13"; 304.8x330.2mm)
    • Tfits many Rackmount chassis
    • EPS12V (24pin + 8pin) power connectors
No details available

No reviews available

Copyright © 2025 All Rights Reserved. Interloper

Chat with Us